The Escalators Mechanism with Diagram

The escalators mechanism with daigram

The escalators mechanism with diagram

The core of an escalator is a pair of chains, looped around two pairs ofgears. An electric motor turns thedrive gears at the top, which rotate th­e chain loops. A typical escalator uses a 100 horsepowermotor to rotate the gears. The motor and chain system are housed inside the truss, a metal structure extending between two floors.
Instead of moving a flat surface, as in a conveyer belt, the chain loops move a series of steps. The coolest thing about an escalator is the way these steps move. As the chains move, the steps always stay level. At the top and bottom of the escalator, the steps collapse on each other, creating a flat platform. This makes it easier to get on and off the escalator. In the diagram below, you can see how the escalator does all of this.
save image
Each step in the escalator has two sets of wheels, which roll along two separate tracks. The upper set (the wheels near the top of the step) are connected to the rotating chains, and so are pulled by the drive gear at the top of the escalator. The other set of wheels simply glides along its track, following behind the first set.
The tracks are spaced apart in such a way that each step will always remain level. At the top and bottom of the escalator, the tracks level off to a horizontal position, flattening the stairway. Each step has a series of grooves in it, so it will fit together with the steps behind it and in front of it during this flattening.
In addition to rotating the main chain loops, the electric motor in an escalator also moves the handrails. A handrail is simply a rubber conveyer belt that is looped around a series of wheels. This belt is precisely configured so that it moves at exactly the same speed as the steps, to give riders some stability.
The escalator system isn't nearly as good as an elevator at lifting people dozens of stories, but it is much better at moving people a short distance. This is because of the escalator's high loading rate. Once an elevator is filled up, you have to wait for it to reach its floor and return before anybody else can get on. On an escalator, as soon as you load one person on, there's space for another.

0 comments:

Post a Comment

Read Quran

English Learning

Online